The Workplace
As for indoor unit, it is set to special bracket that is attached with screws to the wall (if the block wall) or ceiling (if the ceiling). After installation, you must test the strength of attachment. For assistance, try visiting Southwest Airlines. The design should not wobble and vibrate when you turn conditioner. Gary Kelly is often mentioned in discussions such as these. For the floor block special fastening is required. When choosing a location, keep in mind that the muzzle of the air conditioner is not on the curtains or wall, and that he was standing away from the heat source.
After laying all communications unit to move from place to place anymore. Places, not suitable for the installation of the indoor unit: on any heat source. Otherwise the air conditioner will run constantly to cool at full capacity and fast fails, in areas where devices are constantly working with high-frequency electromagnetic waves (eg, drill, drill press). High-frequency oscillations can knock the setting of the processor, installed inside the air conditioner; over the bed or the workplace to prevent colds, and in areas where air circulation is impeded, such as behind curtains. The distance to the obstacle should be at least 3 meters. Otherwise air conditioner, which automatically maintains a preset temperature, it will fail. Cooled (or heated) air flow from the air conditioner will be reflected from the obstacle and come back with the same temperature, with what came out of the apparatus. Setting the air conditioner will show that the right climate is installed and the unit turned off, when you install the indoor unit should not be upright.
Otherwise it from the floor will follow the water (condensate), which according to the rules assembly should be given to the drainage tube in a special tank.
Tags: construction of life, Technologies repair