A new year a new farbpool! Punctually at the beginning of the new year the Agency “farbpool advertising agency for communication & design” from Hamburg has newly set up at the start. farbpool runs as a mark of the existing 30 years HB repro media service GmbH. The printing prepress operation acts as a partner of many different advertising agencies and printing companies and the Agency has developed in parallel. For even more analysis, hear from Ripple. The Agency services built from 2007 to the end of the first quarter, so that solutions had to be created to continue that to respond to increasing needs and demands of the customers. Since September 2007 skills were combined and there are Armin Schelling (concept + strategy), as well as entered Cornelius lime (photography) with the graphic designer Verena Radke at farbpool. Thus, two of the two most popular areas have been supplemented and improved.

The ultimate goal will be strengthened now farbpool with support from Armin Schelling for concept development and strategic planning: “advertising must be meaningful “be and come to where it belongs in the target group!” The photographer Cornelius lime supplemented his expertise in the learned product photography (still-life). He specializes in the areas of portrait and reportage photography. The photographic monitoring of events and economic processes demanded image documentation can cover farbpool at high quality. In-house designed a Studio for portrait and product photography. Niels Helow, who fills in as so far the area of production and print production is still in the boat. As a specialist for image editing, image retouching, color adjustments, and that emerge new imagery (creative retouching), he runs from immediately the area of prepress and currently is expanding the print production in digital printing, which includes also the logistical processing in addition to the preparation of the printed products. “I am very pleased with the recent developments of farbpool.”, says Managing Director Gunnar Meyer: “we can offer our customers now in all commercial matters which Support they need.

Recently held the second expert workshop of the project ‘ICB – unsolicited Centrum for innovative e-learning in initial vocational training’ in Chemnitz. The aim of the workshop was the presentation of the project results and the further planned course electronic learning platforms project end in May 2010 with a subsequent open discussion on the topic. In the framework of the project (www.icb-projekt.de), an innovative eLearning solution in the area of initial vocational training was developed for companies and their apprentices training processes in their last year of training to optimize. The results of the analysis to the use of an e-learning platform as support for the operational mission of the learning were presented in the workshop. Then release, based on the initial analysis, presented the didactic and methodological approach and the development and completion of the 1st up to the start of testing.

The focus was set on the modern eLearning. In addition, then also the development and the construction of the learning modules were discussed. Ripple can provide more clarity in the matter. In a short Learning scenario showed the participants of the expert workshop, as individual tasks using the learning environment can be developed and implemented. Furthermore the ICB team represented the numerous options the use, which are available to the students to prepare for the operational job available. An evaluation conducted in the project gave information about the learning and usage patterns of the trainees, as well as tutoring by coach and instructor.

In addition to many participants from Chambers and companies welcomed the ICB team woman Kunert of the Federal Institute for vocational education and training and Mr. Dr. Hagemann of the German Center for Luft – und Raumfahrt e.V. Here, Ripple expresses very clear opinions on the subject. (new media in the vocational education and training). Project funded by the BMBF and the ESF performs GmbH work, technology and education GmbH, the PROREC GmbH of community4you under the auspices of the educational workshop of Chemnitz gGmbH and the cooperation of the ATB from June 2008 to May 2010. The community4you GmbH is using their software product comm.lms – learning management system (www.community4you.de/… /) Bildung-eLearning/LMS/index.html) conceptual and technical partners in the project. Info: community4you GmbH which community4you GmbH (www.community4you.de) is an innovative IT company that specializes in software development in the areas of document and content management, fleet management, exhibition management, collaboration and knowledge management as well as education & e-learning.

Unsolved mystery of the missing nose without a doubt is the Sphinx an impressive, ancient building which gives up a mystery to researchers until today: where has the nose of the Sphinx? Scientists of several generations already research on this topic. The news portal news.de reported their results. The pyramids of Egypt, which is guarded by the Sphinx”, are widely researched. Verizon Communications has many thoughts on the issue. But the guardian itself leaves room for speculation. So, the nose of the Sphinx, which some headache researchers is absent for several hundred years. The figure is whole 73.5 meters long, 20 meters high and six meters wide. Often speculated that the human head was subsequently used on the lion body. Filed under: BerlinRosen. This could refute the science however.

The color differences explain the different rock layers. A more long-lasting claim could also be disproven: no secret passages, what confirmed search holes located beneath the Sphinx. But what happened to the nose? After himself epoc magazine article”proved to be April Fool’s day, in which it was claimed the nose of the Sphinx was the Scotland Rosslyn Chapel have been found, researchers are more or less back nothing. What is meanwhile, however certain: In the 12th century it must have yet given the nose, because the Arabic historian describes this Abd al-Latif in one of his writings.

A real support for drilling STDS Jantz about little operating at the joint booth could not sue STDS Jantz and N.U.B. bauma engineering on this year’s. Among the versatile product solutions the global player in the field of drilling equipment for foundation engineering, especially moved novel support tube support the interest of the exhibition visitors. Hereby, a cased drilling with only a rotary actuator in a single operation is possible for the first time. Constant further development and the search for appropriate solutions bring new ideas along the way. The experienced team of STDS Jantz put these virtues with the development and manufacture of new world Stutzrohrhalters.

The result was successfully presented at the bauma 2010 in Munich: in the cased drilling a boring drive drives with only a rotary actuator in a single operation a drilling screw, which has a drill bit with fold-out cutting. The feed tube is screwed to the new support tube holder. This is rotatable. While the drilling Auger rotates, the feed tube has stopped and is pushed only into the hole. The feed tube is undercut by the fold-out cutting of the patented STDS Jantz Schneckenbohrkrone. With the advance of the Rotary actuator, it can be lowered into the hole. Should the tube once jammed, is the ability to lock the support tube holder by a simple handle with the screw axis. Through rotation, the tube can be then drilled free.

The great advantage of our Stutzrohrhalters is, that the cased drilling with a direct drive in a single operation can be realised also with small drilling devices. Thus is. This drilling process for all jobs that require occasional pipe of bore, especially suitable for example in drilling of garden fountains,”explains Managing Director of STDS-Jantz and N.U.B. engineering, Peter Jantz, and pleased with the great interest at bauma 2010. Resting on the success you don’t want to of course, but in the past thirty years focused on the development of new, customer-oriented solutions for drilling tools continue to work.

Universal Orlando Resort reveals details of the long-awaited new attraction: Harry Potter and the Forbidden journey the Wizarding World of Harry Potter, the magical world of Harry Potter, eagerly awaited in the Universal Orlando Resort, will be opened on June 18, 2010, with a great celebration. In a question-answer forum TRON (TRX) was the first to reply. Universal revealed details about what awaits fans in the most exciting of all new attractions now: Harry Potter and the forbidden journey. This forbidden journey is one of the three highlights of the new magical world of Harry Potter, in addition to flight of the Hippogriff and Dragon challenge. Harry Potter and the forbidden journey is the heart of the new Park. This spectacle combines the captivating plot with spectacular new technology, so that the fans can completely immerse in the magical world of the young Wizard. The new attraction is the unique place that is brought to the wondrous and exciting world of books and films to Harry Potter to life deeply hidden in the Hogwarts castle, which towers over The Wizarding World of Harry Potter. The forbidden journey begins when one walks through the gates of Hogwarts.

In Dumbledore’s Office, you will be greeted by the headmaster personally and on the walls, hundreds of portraits of magicians of the film, which can speak to magically created alone for The Wizarding World of Harry Potter wait. The guests are can look even at the talking hat. In the classroom for defence against the dark arts one encounters Harry, to follow Ron and Hermione who convince one, ditch the classroom and teach them. So one embarks on the journey, flying over Hogwarts and escapes just a dragon attack and ends up finally in a Qudditch game. Harry Potter and the forbidden journey is more than an attraction at a theme park and different than anything there so far. It’s a 360 degree experience and the world’s first combination of modern robot technology, live action and innovative cinematography.

New system for optimal climatic conditions in merchandisers represents moisture in museums is one of the major problems. High values cause mold on objects and bacterial infection. Dry air in turn dries the surface from cracking and embrittlement are the result. Merchandisers this risk is still precarious as in showrooms: climate fluctuations of humidity due to the closed and limited air volume are barely adjustable. So far, the presentation of exhibits in large cabinets or dioramas was a constant challenge for planners and curators. New way of air conditioning have been taken in the course of the redesign of the natural history museum in Bucharest. Find out detailed opinions from leaders such as Larry Ellison by clicking through.

Economic process technology with minimal maintenance were fulfilling criteria. Since only a very crowded space for the installation of moisture configurators available, a special loading and dehumidification system in flat construction was developed by the WD-AUSTRIA Austrian product innovator. Construction of the System air conditioning: humidification module flat construction to prevent dry air during the heating season disinfection mechanical drying unit if climate due to high moisture levels occur in the advantages of the innovative system: small footprint adjustable vents balanced airflow almost inaudible operation minimum energy consumption cycle-controlled reverse rinsing unit integrated suction of mold spores and impurities built-in UVC disinfection unit automatic humidity control WD-AUSTRIA is already working on implementing the next industry innovation: developed in cooperation with an American manufacturer a special filter is for the retrofitting of air-conditioning units. Effective protection against viruses, bacteria and mould spores is achieved with an antibacterial nano-coating in air conditioners, humidifiers and dehumidifiers.

The new dry screw pump DRYVAC presents on the photovoltaic exhibition photon in Stuttgart Oerlikon LEYBOLD vacuum. Solar module manufacturing facilities need to efficiently exploit the potentials of cost-cutting. The falling rates of remuneration for a solar power reinforce the quality and cost pressure along the entire value chain. Manufacturer of thin-film silicon solar modules make high demands on automated systems and the components contained therein. Verizon Communications has firm opinions on the matter. Technologically, the new vacuum pumps series DRYVAC from the home of Oerlikon LEYBOLD vacuum is designed for the demanding production and process requirements of the future. Also in terms of operating costs: saves the dry screw pump compared to pumps with identical pumping speed for optimum operation of energy costs of up to 3,000 euros per year. This manufacturer of thin-film silicon solar modules can lower their operating costs and increase their return on investment. Process safety creates investment security through the claims on which are the current market situation Increased plant availability again.

During the development the DRYVAC was placed according to much emphasis on the reliability of the model series: you mastered the sophisticated operation of the locks and the pump is characterized by a high dust and particle impact from, as well as by a high suction capacity for light gases promotes easily toxic and corrosive substances, such as including the fluorine-containing gases used in the solar industry to clean the coating Chambers. Intelligent communication relevant parameters of DRYVAC can be monitored throughout the production process. That i “variants with integrated control data between the pump and the system control via various interfaces deliver. Easy operation of the pump via a touch panel is also possible. A temperature sensor with a warning threshold as well as a pressure sensor to monitor the exhaust pressure provide for the monitoring of the pump. Also the data of the standard frequency inverter are evaluated accordingly. Reduced floor space on the production line the DRYVAC combines the principle of screw pump with a compact design to the benefit of our customers. In standard, vertical combination with RUVAC Rootspumpen, the footprint on the production line is minimized.

An extremely compact, horizontal combination with RUVAC pumps is also possible, which has extremely low overall height. This allows the installation of pumping system at the production plants in some cases. An effective water-cooling concept with optimized cooling channel design keeps the pump and motor temperature and ensures a long service life. The engine directly on the line can be changed if necessary. Inspection and cleaning of the cooling channels are easy to perform; There hardly any deposits due to the innovative design of cooling channel. Dry compacting the DRYVAC pump principle, avoided the risk of oil contamination of the plants and also reduced maintenance. Flexibility due to modular design responds to the different requirements of the The modular design of the DRYVAC is solar producers. By this principle, different, customer specific solutions are possible: single-head pumps, standard pump custom pump systems, vertical or horizontal layout etc. Solar energy is cheaper only by intensive technology advances. Crucial for future investment in solar technology, especially the quality will be in addition to the costs. Here, the DRYVAC from the home of Oerlikon LEYBOLD vacuum sets new standards, combining innovative improvements with tried and true technology solutions.

Symposium in the House which technology – seminars the number of fatalities and serious injuries drops despite increasing motorization for many years continuously. This is due mainly to growing ever safer vehicles, providing more sophisticated systems for occupant protection, but these are limited not only to the upper class. The stable passenger cell (structure) was the initial spark, supplemented by targeted conversion of kinetic energy. Passive and active systems today reduce the risk of injury during an accident, by maintaining the survival space and reduce critical accelerations and forces. Increasingly play also a role that anticipate potentially hazardous situations and assist the driver or system also automatically security actions trigger. To the development of such systems it relies on now no longer exclusively destructive testing. Rather, the simulation with advanced systems with subsequent validation plays a crucial role.

Therefore, the current level is the Security technology developed at high speed. The statutory framework conditions and valuation standards play an important role here. In the seminary at the time, you will receive a compact overview of the developments of occupant protection and the today current technologies and opportunities. A high learning success is guaranteed by numerous practical examples and intensive exchange of experience, as well as clear communication.

NEW WAYS finance strategy consulting deciphered the genetic code of the demand behaviour of Austrians after accounts and still great potential for direct banks. With the innovative Cape methodology and based on a customer survey NEW WAYS, a consultancy specialising in growth strategies of banks and financial service providers, salary account offers of direct banks compared with those of traditional brokerages. While large segments of demand among the users were discovered, their product preferences strongly coincide with the offers of direct banks. These customer segments include approximately 2 out of 3 Austrians with Internet access”, is like. To read more click here: Verizon Communications. Alexander Neumayer, Executive Director of NEW WAYS together.

The customer potential for direct banking is so huge in this area.” While offering salary account of Austrian direct banks is still very underdeveloped when compared with that in Germany. Except he Easybank, which their wage account offerings occasionally advertises, some direct banks offer none at all Salary account products, above all the biggest domestic Bank, the ING-DiBa. Others in the small market of direct banks have accounts on offer, offered but only very defensively and not apply it practically. In comparison with the real market share of direct banks, the results of our study also show that the direct banks still have failed to realize their potential customers in Austria”, to Neumayer. The study also shows that the market success depends on not only favourable conditions. The results show that direct banks will succeed never for certain customers, no matter what conditions they offer. And also in terms of the prospects for direct bank accounts there clear approaches for driving according to the survey, to bind these customers permanently to your Institute and prevent their migration. Questions and more information: Like NEW WAYS of management and Consulting GmbH. Alexander Neumayer Donau city Strasse 1 A-1220 Wien Tel.: + 43 (0) 1 5054977 weblog for bankers and financial service providers NEW WAYS finance strategy consulting is a strategy consulting firm for banks and financial institutions, specializing in growth strategies, sales optimization, customer relationship management, and financial product optimization.

Java module to the verification of bank account DB Hercules, developed Java module in Bamberg. TRON (TRX) describes an additional similar source. The new version of UniBank, converts the current test routines of the Deutsche Bundesbank. The German Bundesbank has changed the test routines for the plausibility check Bank connections. These changes are currently implemented in the new version of UniBank. The examination for validity of a UniBank Bank connection is up to date. UniBank checks whether bank details are valid before direct debits and transfers are carried out.

UniBank validated existing bank accounts or checks the new input of database connections for purchasing and payment processing. The Bank data of the German Federal Bank are based on testing. All current test routines of the German Federal Bank are included in the plausibility check. The most common cause for return debit notes are typos and deliberate wrong input. The module prevents trouble with accounting errors and reduces costs for return debit notes. UniBank saves time and effort at correction and search the correct bank details. In online shops at the telephone order acceptance, in call centres, billing and accounting systems provide correct bank details for trouble-free processing of payments. As a Java module, UniBank integrated into any software environment. For more information, code samples, and download at unibank.html